Meet One Tour 2.0 Electric Tricycle Assembly Guide
Watch our complete step-by-step assembly guide for the Meet One Tour 2.0 Electric Tricycle, showing how to correctly assemble, adjust and prepare your new Meet One Tour 2.0 for safe riding.
Additional Information About the Video
The Meet One Tour 2.0 is a substantial semi-recumbent electric tricycle designed for riders seeking comfort, stability, long-distance capability and strong hill-climbing performance. Its rear-motor system, full suspension, fat tyres, large battery and substantial construction mean correct assembly and adjustment are especially important.
In this complete assembly video, the team at Trike Bike Australia takes you through the assembly process for the Meet One Tour 2.0, highlighting the important installation steps, adjustments and safety checks required before riding.
We recommend watching the complete video before beginning assembly and then returning to the relevant sections as you work through each stage.
- Watch the complete video once before beginning assembly.
- Follow the assembly sequence shown in the video.
- Pause or replay individual sections whenever you need a closer look.
- Make sure all nuts, bolts and fasteners are correctly installed and securely tightened.
- Pay particular attention to the wheels, steering, suspension, hydraulic brakes and electrical connections.
- Check that all cables and electrical wiring are correctly routed and cannot contact moving components.
- Confirm that the seat, backrest, pedals and rear cargo basket are properly secured.
- Complete a thorough final safety inspection before your first ride.
View the Meet One Tour 2.0 Electric Tricycle here
About This Video
This assembly guide has been produced specifically for the Meet One Tour 2.0 Electric Tricycle supplied by Trike Bike Australia.
Electric tricycles are continually being improved, and individual components, controls or specifications may change between production runs. Owners should therefore use the most recent Meet One Tour 2.0 assembly information available from Trike Bike Australia rather than relying on older or unrelated electric tricycle instructions.
What You Will Learn
- How to correctly assemble the major components of your Meet One Tour 2.0 Electric Tricycle.
- The recommended sequence for completing the assembly.
- How to identify the important assembly and adjustment points.
- How to correctly position and check the handlebars and steering system.
- Important considerations when installing and securing the wheels.
- How to install and adjust the seat and supportive backrest.
- What to inspect on the hydraulic braking system.
- How to identify and connect the important electrical components.
- How to check the suspension, cables and wiring before riding.
- How to carry out the essential final checks before your first ride.
- Which areas require particular attention during the final safety inspection.
Important Assembly and Safety Information
The Meet One Tour 2.0 is a large, powerful and capable electric tricycle. Correct assembly, brake adjustment, steering setup, electrical connection and final safety inspection are essential before it is ridden.
Take your time during assembly and never assume a component is correctly adjusted simply because it has been installed. Carefully check all fasteners, wheels, brakes, steering components, suspension parts, cables and electrical connections before operating the tricycle.
Because of the size and weight of this model, using two people for some assembly stages may make the work safer and easier.
After completing the assembly, perform the first test ride in a safe, open area away from traffic, pedestrians and obstacles. Become familiar with the steering, hydraulic brakes, torque-sensing pedal assistance and electric controls at the lowest assistance level and a low riding speed.
Remember that an adult tricycle steers and corners differently from a conventional two-wheel bicycle. Always reduce speed before turning and avoid making sudden or sharp steering movements.
If you are not confident carrying out any part of the assembly, brake adjustment or electrical setup, we recommend having the work completed or inspected by a competent bicycle mechanic.
Before Your First Ride
Once assembly is complete, take a few minutes to inspect the entire tricycle.
- Check that the front and rear wheels are correctly installed and secure.
- Check that the handlebars and steering components are correctly aligned and tightened.
- Operate all hydraulic brakes and confirm they work correctly before riding.
- Check that the brake rotors rotate correctly and are not obstructed.
- Check that the pedals, cranks and other rotating components are secure.
- Confirm that the seat and backrest are correctly positioned and securely tightened.
- Inspect all electrical cables and connectors and make sure they are fully connected.
- Check that no wiring or cables can interfere with the wheels, steering, suspension or other moving components.
- Check that the battery is correctly installed and securely locked into position.
- Check that the rear cargo basket and all fitted accessories are secure.
- Check the tyre pressures before riding.
- Confirm that the lights, display and electrical controls operate correctly.
- Test the brakes, steering and electric assistance at low speed in a safe area.
A careful final inspection only takes a few minutes and is an essential part of preparing your new Meet One Tour 2.0 for its first ride.
About the Meet One Tour 2.0
The Meet One Tour 2.0 Electric Tricycle is a premium semi-recumbent electric tricycle created for riders seeking comfort, strong performance and extended riding capability.
Its relaxed riding position, supportive seat and backrest, full suspension and wide 20 × 4.0-inch fat tyres help provide a comfortable and confidence-inspiring riding experience. The rear-motor system delivers strong assistance for hills and demanding riding conditions, while the high-capacity battery supports longer recreational and touring rides.
The Meet One Tour 2.0 also features hydraulic disc brakes, torque-sensing pedal assistance, reverse mode, a colour LCD and a large rear cargo basket. Its combination of comfort, carrying capability and electric performance makes it suitable for recreation, shopping, longer journeys and everyday transport.
If you are considering a Meet One Tour 2.0 or would like advice about whether this model is appropriate for your height, mobility, intended route or riding requirements, contact the team at Trike Bike Australia.
View full Meet One Tour 2.0 specifications, pricing and options →
Helpful Trike Bike Resources
- Watch all Trike Bike Australia videos
- View our complete range of Meet One electric tricycles
- View our complete range of adult tricycles
- Meet One Tour 2.0 Electric Tricycle
Need help? Trike Bike Australia has specialised in adult tricycles since 2007 and provides Australia-wide product, spare-parts and technical support. If you have any questions about assembling your Meet One Tour 2.0, contact our team before riding.
Related Tricycle Models:
Helpful Resources: